Paint in the rain! and with Kerosin.

the best way to paint your machine is to do it in the rain. first get the paint, uhhh, black, and then some ruff sanding paper and scuff the surface very well. when it looks as if you've gone too far, go another 20 mins. in a haphazard fashion, apply many coats of primer. spray it untell it just begins to run. before that lot dries, hit it with a splash of kerosin. push the machine into the rain when theprimer/kerosin flashes. if you are short of time, a match will help decrease the flashtime. beat out flames with a copy of easyriders... once in the rain, spray the color immediatley. ONLY ONE COAT! move the machine into the garage and let air drie. just to give the illusion your a ponce, pour pink paint on an old rag and throw it once only at the tank. voila, original cool....
Spoke Momo - Canada
! Important Disclaimer
Advice given in this section may or may not be accurate, safe or wise. Always use common sense and when in doubt assume that any advice given herein is incorrect and liable to end in terminal engine or part failure and possible injury or death. www.ratbike.org and its contributors can accept no responsibility for anything, anywhere, regardless of cause.



- [ HOME ] - [ GALLERY ] - [ ARCHIVE ] - [ LINKS ] - [ CONTACT ] - [ ARTICLES ] - [ FORUM ] - [ NEW ] -